How Much Fuel Do We Have?
We occasionally get a sticky fuel sending unit and have come up with a few minor adjustments to the Stewart Warner fuel sending units...
Lightweight Jack
In a GAOA newsletter a few years ago there were pictures and a description of an aluminum L-bracket that could be bolted on the...
Taming the Tail Wheel Shimmy
Written by Will Fox, Technical Counselor, EAA Chapter 691, Los Alamos, New Mexico
Ever had a tail wheel shimmy on you? If you haven’t, consider...
Propeller and Spinner Installation Tips
Propeller cutout and resin: The template for the cutout in the spinner for the prop blades is incorrect due to the addition by SH...
GlaStar Gear Leg Dampers
The pictures are of my wood gear dampers installed on my GlaStar. I used mahogany base molding glued together to form a faired shape...
Replacing The Whisperflos
The Whisperflo vents that came with my TWTT Sportsman are quite leaky. I ended up taping them over from the back side during the...
Wing Support Jig
If you are ready to attach the wings to the cage no doubt you’ve done some thinking about how you are going to support...
Vent Check Valve
Because my vent system still allowed fuel to vent in a nice stream when topped off and turning on the ground or parked on...
Streamlined Heated Pitot Tube
Want a unique pitot tube? Follow these instructions from Eric Jones and build a custom heated pitot tube. Eric Jones can be reached via his...
Sealing Flush Fuel Necks
Here is an option for sealing the flush fuel necks to the fuel tanks. If you have a metal lathe or have access to...