Home Tags Glasair

Tag: glasair

Association Update

In January 2014, the Glasair.org website which catered to builders of the low-wing Glasairs went permanently off-line. Bruce Gray, who ran it, had been...

Are You a Test Pilot?

Who do you think of when you hear the term, ‘Test Pilot’? I’d bet many, if not most of you, think first of Chuck...

Oshkosh AirVenture 2011

Written by Greg and Sue Prentiss Well, here we are at AirVenture 2011, aka Oshkosh. It’s a great time to be alive and be able...

Oshkosh AirVenture 2009

Written by Greg and Sue Prentiss  For starters, we didn’t beat out the RV aficionados. It was close though, 400+ RVs and 19 Glasairs. I’m not...

Sensenich Fixed-Pitch Propeller Nomenclature and Repitching

Sensenich aluminum fixed-pitch propeller model designation system EXAMPLE..._70CM6S16-0-79_ _  Special letter prefix to identify accessories or composition of propeller. Current letters include 'S' for STC...

Safety alert: Precision Airmotive Fuel Injection Servos

Attention All Owners of aircraft with Lycoming Fuel Injected Engines. Please read these safety alerts from Precision Airmotive. Hex plug 383493 coming loose from regulator cover. Service...

SensenichDirect Stoddard-Hamilton Propellers

This page was originally published on the Sensenich website. An archived version can also be found here. Aircraft Engine Standard Climb Cruise Weight (lb) Note* Glasair I TD,FT,RG Lycoming O-320 70CM()S16-0-79 70CM()S16-0-77 70CM()S16-0-81 38.75  8 / 13 Glasair II...

Oshkosh AirVenture 2007

Written by by Greg and Sue Prentiss If I was writing a newspaper headline it would probably read: Hammer Brothers deliver ANOTHER one—two punch for Glasair at AirVenture 2007. A...

Glasair Control Stick Clearance Tips

Q: I am having trouble installing the control stick into the control yoke. A: Sand the black powder coating off the control stick where it...

Streamlined Heated Pitot Tube

Want a unique pitot tube? Follow these instructions from Eric Jones and build a custom heated pitot tube. Eric Jones can be reached via his...