elevator Archives - Page 4 of 4 - Glasair Aircraft Owners Association

Home Tags Elevator

Mods

Mylar Gap Seals

Submitted by Kory Cornum I installed Mylar gap seals on my Glasair III on 18 April 1993. The seals are from High Performance Engineering, Inc.,...

How to & Builder Tips

Elevator Building Tips for the GlaStar and Sportsman

Keeping twist out of the aft elevator partial spar: There is a discontinuity between the aft edges of the elevator respective to each end...

How to & Builder Tips

GlaStar Elevator Stop Plate Installation Tips

DON'T do it like the manual says! The drawings show the stop plate mounted below the elevator bellcrank with the spacer pack modified to...

1 2 34Page 4 of 4

Archives

ABOUT US

The Glasair Aircraft Owners Association is the one must-join association for Glasair, GlaStar, Sportsman 2+2, Merlin, and OMF Symphony builders, owners, pilots, and enthusiasts. If you’re currently building, flying—or dreaming of building and flying one—this is the place for you! We are not affiliated with Glasair Aviation, LLC., but we maintain a great working relationship. Our members can be found worldwide.

Disclaimer: This website contains information submitted by our members about building their airplanes. Some methods they employ may differ from the factory instructions. Builders are advised that they are responsible for their own construction methods and should check with the factory if any of the information included on this website differs from the factory manuals. The Glasair Aircraft Owners Association has not checked the accuracy or safety of any information included on these web pages and any users of this information do so completely at their own risk.

Tag: elevator

Mylar Gap Seals

Elevator Building Tips for the GlaStar and Sportsman

GlaStar Elevator Stop Plate Installation Tips