Glasair Panel Drawings

• Version
• Downloads 190
• File Size 266.58 KB
• File Count 1
• Create Date October 23, 2016
• Last Updated October 23, 2016

The avionics and instrument drawings show hole locations and hole sizes. They also show behind panel clearances in red.

David Walker's Panel Drawings notes:

1. These panels are suitable for the SH-supplied Future Vision panel
2. With the right post-processor you can use these drawings for laser cutting. I suggest thicker material (2.5 mm min) than supplied by SH as this is a full IFR panel & contains a lot of components - too much for the flimsy SH panels
3. Check holes of SH supplied circuit breakers - some may not be the same diameter
   (particularly the 60A which may be not Klixon)

Attached Files