Images tagged "rudder"

Applied first light coat of primer to rudder top and bottom seams. Laminated in bulkhead for counterweight area. Installed wires and plugs for taillight.
Rudder Pedal Assembly and Brakes
bl-7689-1
For Sale Glasair 1 T/D
Cut the cloth and laminated 1 layer at the hinge location on the inside corner of the right rudder panel. Bonded the aluminum reinforcement in place and laminated one layer over it. This photo was taken during the bonding of the aluminum reinforcement.
Rudder pedal detail
1 layer applied to the leading edge of the vertical fin.
Sanded the primer off the leading edge of the vertical.
bl-6757-2
Capped the bottom of the rudder counterweight arm.
Run Control Bracket
bl-6757-1
Aft Bulkhead Detail
Matco parking brake
bl-6481-1
bl-6469-1
Moving a Glasair project
bl-7325-2
Chip Becks Glasair III N335CB
Fabricated rudder pedal pieces. None of this stuff was premade when kit 446 left SH.

[Show slideshow]
1 2 ... 7