Images tagged "glasair-super-ii-s"

Finished building the control tunnel lid and mounting the emergency gear hand pump.
Bonded the top support laminate for the wing upper trailing edge extension.
this shows all the cloth I have ready to laminate, just waiting on some resin. Should be here soon.
Filled the channel around the horizontal stabilizer.
Started working on the vertical fin / rudder extension.
Continued building the ailerons.
Continued to work on hydraulics and brake lines.
bl-6254-1
I finished cutting out the engine mount area.
Finished enclosing the seat back support angles.
Continued the installation of the canopy doors.
Aileron and Flap Work.
Sump from a bottom view.
Continued to get the flaps ready to close.
This photo was taken at Oshkosh 1999. This is Stoddard Hamilton factory Glasair Super II. My girl friend and I both took demo flights in the Glasair Super II and Lancair 360. We had already put a deposit down on the Glasair Super II, but wanted to make sure it was the right plane for us. After the demo flights, we came to the conclusion that the Glasair Super II was definitely the plane we wanted.
Another Oshkosh 1999 photo, this is my girl friend getting ready for a demo flight.
Continued the installation of the oil cooler.
Cut the cloth and laminated 2 layer around the dorsal.
Finished the control stick work.
Sanded and filled on the top of the wing and worked on the wing tips.

[Show slideshow]
1 2 ... 25