Images tagged "glasair-ii"

Spoiler on N24TX
Tom Taylor's Glasair II
Injector Fuel Servo and Elbow Detail
Leading Edge Extension (LEX)
John Burnaby's Franklin Engine
Glasair 2RG
Mixed up the mill fiber and installed all the ribs except the D ribs put the qcell in the corners. Installed all 4 layers of lams to both sides of the back ribs.
Installed the two stiffeners back into the fuselage after we moved them back the 1.5 that is mandatory in the SH service bulletin.
Injector Fuel Servo and Elbow Detail
Wingtip detail
Injector Fuel Servo and Elbow Detail
Painting of the airplane
AERO LED Landing Light
just put everything the new 24/24 shop. bulit work tables and Mike took his first ride.
Cut out the fuselage longerons per the instructions from SH. The wing on a RGII S has to be moved back 1.5 I am thankfull the fuselage had not been started on yet. This is Rich working away.
Another picture top of fuselage with duck tape and toung depressors. The tape alone was not enough to hold the fuselage together without stretching
Injector Fuel Servo and Elbow Detail
Engine detail
Glasair In Flight
John Burnaby's Franklin Engine

[Show slideshow]
1 2 ... 4