Images tagged "flaps"

bl-7518-2
Moving a Glasair project
Trailing Edge Board
Glasair N15F SeatPan Wiring 4 of 6
bl-7488-1
Bonded flap actuator nutplates. Fabricated aileron bellcrank to actuator fitting control rods. Removed foam at top of flap ribs for bonding upper skins. This is the nutplates jigged in place with the actuator fittings while bonding.
Slotted Flap Hinge Detail
Flap Angle Mounting Pads (Mill fiber)
Flap Positioning
Continued building the ailerons and started fitting the flaps.
Drilled holes for wire conduit. Started trimming gear door cutouts. Started getting flap actuator hardware all lined up and ready to install.
bl-6995-2
Wing to Fuselage Fairing
This is the flap plunger tube, or button on the flap handle. Real fun to make and then it gets hidden inside the flap handle.
Gary Jones's Super IIS FT
Mill Fiber Shims/pads for Slotted Flap Attach Angle Brackets
Added laminates in flap motor mount area
Flap Hinge Inspection Panel (part 1)
Slotted Flap center wing attach angle
Worked on the flaps, trim fit.trim fit.trim fit.

[Show slideshow]
1 2 ... 10