- Version
- Downloads 179
- File Size 255.56 KB
- File Count 1
- Create Date January 5, 2017
- Last Updated October 28, 2020
David Walker's Panel Drawings in AutoCAD DWG and DXF Format
Notes:
Advertisement
- These panels are suitable for the SH-supplied Future Vision panel
- With the right post-processor you can use these drawings for laser cutting - thicker material is suggested (2.5 mm min) than supplied by SH as this is a full IFR panel & contains a lot of iron - too much for the flimsy SH panels
- Check holes of SH supplied CB's - some may not be the same diameter (particularly the 60A which may be not Klixon)
Attached Files
| File | |
|---|---|
| A |