063-09010-01 GlaStar Wing Brace Kit Instructions
GLASTAR WING BRACE KIT
This kit provides all the necessary parts, materials and hardware to allow your GlaStar's wings to be folded and stowed securely for tie-down, hangaring or ground handling. If you...
063-09009-01 GlaStar Lycoming Cowling Installation Instructions
LYCOMING COWLING OPTION
This option kit provides all the parts, materials and hardware necessary for a clean, sturdy cowling installation around a Lycoming four-cylinder engine. Although the cowling should...
063-09007-01 GlaStar Dual Brake Option Instructions
DUAL BRAKE OPTION
This Option Kit provides all the necessary parts, materials, hardware and plumbing supplies to install complete dual toe brakes on the co-pilot's side of the GtaStar.
The co-pilot's brakes...
063-09006-01 GlaStar 6.00 by 8.00 by 6 Main Gear
GLASTAR 6.00/8.00 X 6 MAIN GEAR INSTALLATION INSTRUCTIONS
These instructions cover the installation of either the 6.00 X 6 or 8.00 X 6 main wheels and brakes on a GlaStar taildragger. They apply to...
063-09005-01 GlaStar Heated Pitot-Static System Option Instructions
HEATED PITOT/STATIC SYSTEM OPTION
This option kit contains all the parts and hardware necessary for a pitot/static system installation suitable for IFR operation except for the pitot tube assembly itself....
063-09004-01 GlaStar NAV-Strobe Light Option Instructions
NAV / STROBE LIGHT OPTION
Properly installed, the navigation/strobe light package included in this kit meets FAR Part 91 standards for aircraft position and anti-collision lighting. The system consists...
063-09001-01 GlaStar Electric Trim Instructions
ELECTRIC TRIM OPTION
The electric trim system consists of an elevator-mounted servo, which controls the position of the trim tab via a rigid pushrod linkage inside the elevator structure.
The instructions...
631-0195-021 Hartzell Constant Speed Propeller Spinner Installation
OPTION KIT: PIN 301-0260-501 -502 OR-503
OPTION KIT INSTRUCTIONS: P/N 631-0195-021
These instructions describe the installation of all three different spinner kits, with the different mounting procedures...