Glasair III Instrument Panel CAD Drawing - McCaskill Created by Greg McCaskill: "I’m building a G3 and I have created a CAD file for a flat panel for dual G3X’s." ...
Lycoming Engine Baffling Templates for the Glasair I Engine baffling templates. See figure G-69, page G-107, Glasair Final Assembly. ...
Slotted Flap Hinges Drawing Glasair slotted flaps hinge CAD drawing. Make from 2024 T-3 Aluminum. Part numbers: 551-3913-001 551-3921-001 551-3956-001 551-3922-001 551-3913-001 551-3914-001 Drawn by Wim Marchal with help from Stephen...
Glasair I Wing Jig Support Templates Glasair I Wing Jig Support templates A, B, C, and D. Scanned at 1:1. Piece them together using alignment marks and lines of specific length on each so that they can be checked for scale (PDF) or use the...
400-00158-03 Glasair Wing Rib Template Includes scale for ensuring correct size for printing. Note: rib "H" is not included in this file. These patterns are from a Glasair II-S set of manuals, but the Glasair I and II use identical ribs. The...
400-00159-01 Glasair II and III Wing Jig Templates PDF of the large paper templates for the Glasair II and III wing jigs. ...
631-0185-001 Glasair I FT Appendix Instructions for the FT landing gear retrofit option. Contains the following: Glasair Addendum 3FT: Pages 1 through 5 Glasair FT Instruction Manual: Pages A-1 through A-7 Pages B-1 through B-45 Pages...
Glasair I Panel CAD Drawing - Dan Olson STP CAD files for Dan Olson's instrument panel. Reference this topic in the forum. ...
Glasair II-FT Construction Manual The manual is applicable for the original Glasair II FT models, serial numbers 1001-1119. ...
Glasair Electric Step Author: David Cross ...
